1 / 3
Metric and SAE Allen wrench head set stand for 1/4 inch hex shank
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for the Allen wrench heads with 1/4'' hex shanks (7 metric and 7 SAE sizes)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a holder for metric and SAE Allen heads with ¼'' hex shanks for the following sizes.
- Metric: 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0mm
- SAE: 5/64'', 3/32'', 1/8'', 5/32'', 3/16'', 7/32'', 5/16''
Recommended print settings for PLA
- layer height: 0.15 mm
- infill: 15% gyroid
- supports: no
- nozzle: 0.25mm