Foot for OXO Good Grips Sweater Drying Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Push-on feet with optional magnet to keep sweater drying racks from sliding off your washing machine when it's running.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I got a couple OXO Good Grips folding drying racks to dry sweaters. My plan was to stack them up on top of my washer and dryer, but the first time I used them, I returned to find my sweaters on the floor. The vibrations of the laundry machines caused the hard plastic feet to slide around until they fell off.
I printed these feet in TPU. They can be pressed on the drying rack's feet to add a little friction. To really make them stick to the top of my steel washer and dryer, I glued a couple 10mm round neodymium magnets to the inside. (There's a recess to keep them centered- if you use a larger magnet or get them off-center, they'll get in the way of the real feet.)
This has totally solved the problem of sliding sweaters and they don't conflict with folding the feet for storage.
Here are the drying racks that these were made to fit:
https://www.amazon.com/OXO-Folding-Sweater-Drying-Fold-Flat/dp/B006LIW9OU
Here are the magnets I used:
https://www.amazon.com/gp/product/B0BW9137Y1 (the 10x3 variety- I stacked two in each foot)
I printed these using TPU with a Shore hardness of 95A and it worked really well- very snug fit, but you can still get them on and off without a lot of fuss.