"Flags" Scupture from local park
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by a sculpture in a local park by Arie Berkulin.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
Inspired by a sculpture in a local park by Arie Berkulin, I made this “vlaggen” or “flags” sculpture model.
There is a flat surface on the bottom, but angled. So I suggest placing the model by face and selecting one of the bottom surfaces:
For FDM printing:
I printed the model with a brim to help adhesion since the legs are so thin, and support is required for these large overhangs.
Even so, you can see from the above image, it didn't print perfectly. So the uploaded model is already changed to make this back leg less pointy, so should print way easier.