Hygrometer holder for Flashforge AD5M Pro.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hygrometer holder with bed mount Flashforge AD5M Pro.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 115
- Wydruki
- 2
- Wyświetlenia
- 749
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
The cover of the author Airjohan71 Dus was used as a fastening. The cover has been slightly modified - a chamfer has been added to simplify installation. The hygrometer readings are best seen when viewed from above, sitting down if the printer is on a stool, like mine, or standing up if the printer is on a table.
The holder can also be used for the AD5M, but without the casing, since the hygrometer extends beyond the dimensions of the metal frame, it will interfere with the closing of the casing door.
Attached are 3 files - a holder for mounting on the right, left and a cover.
Printing is PETG, or better yet ABS. Support and brim are required.
V2 - removed the step on the model.