CR-10 V3 SFS v2.0 bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket for the BTT SFS v2.0 runout sensor to be mounted on a CR-10 V3.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The CR-10 V3 sensor bracket is, to say the least, useless because the angle it makes with the spool and the extruder is generating a lot of friction.
I already solved the problem with a previous model to relocate the stock sensor.
This model do the same thing but for the Smart Filament Sensor v2.0 (SFS) from BIGTREETECH (BTT).
This bracket is used in combination with the spool holder mod.
I also made a spacer/shoulder for the fittings, because the small piece of tubing acting as a washer for the fittings didn't do it for me.
BOM
To use the bracket you need:
- 3x M3x16 CHC screw
- 2x M4x10 CHC screw
- 2x M4 M washer
Note: The original sensor was basically an endstop with three wires, the SFS v2.0 has both an encoder and a micro switch, so it requires four wires and possibly an adapter for the harness or the intermediary board if you want to use them without bypassing everything.
Update
2025/01/22:
- Added a model that use the M3x6 screws included with the sensor.