1 / 1
Qidi Q1 Pro 360° part cooler duct: Mod for Volcano nozzle — zdjęcie 1

Qidi Q1 Pro 360° part cooler duct: Mod for Volcano nozzle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

1.8/3mm extended version of Qidi Q1 Pro 360° part cooler duct for the Volcano nozzle mod, prevents nozzle cooldown

Ocena
5 / 5
Polubienia
21
Pobrania
62
Wydruki
1
Wyświetlenia
898
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The fan shroud was made 1.8 and 3mm longer because with the Volcano nozzle mod (https://www.printables.com/model/656891-qidi-x-max-3-volcano-nozzle-adapter), some prints with high cooling failed with the error “the temperature of the nozzle is too low” and the cooling was not good (see photo of the object [printed with original 360° part cooler duct]). I have only tested the 3mm longer version, the 1.8mm version is untested.

Tagi