Connector blocks for WAGO projects
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connector blocks (parametric model) for WAGO 260-311 & WAGO 261-331. Also possible to connect on DIN Rail or with screws
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This block can be 3D printed for your new DIY project to orden your electric wires in a proper way. It is specifically build for two types of Wago connectors which are used in main electric household installations:
- WAGO 260-311 (One in, one out)
- WAGO 261-331 (Two in, Two out)
Select your quantity needed, click it together and plug it in the main block.
The block can be mounted on/ with:
- Screws (wooden panel,…)
- DIN Rail (use the plug in connector)
Two end caps are also provided to maintain a safe installation.
All printing in PETG is recommended: spring connections for sure.
0,4mm nozzle
Have fun and be creative!