1 / 1
Rivian Armrest Console Slide-out Tray Mechanism Parts — zdjęcie 1

Rivian Armrest Console Slide-out Tray Mechanism Parts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Group of parts to allow an Organizer Tray to slide up and back out of the Armrest Console Rivian R1T, R1S

Ocena
0 / 5
Polubienia
36
Pobrania
177
Wydruki
0
Wyświetlenia
1362
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This group of files includes the parts needed to make a Rivian Armrest Console Organizer Tray slide-out of the deep compartment. You can see the complete design in this post: https://www.rivianforums.com/forum/threads/slide-out-armrest-console-organizer-tray.39285/#post-709214.

The post above includes drawings and video showing assembly and installation.

These files DO NOT include the Organizer Tray (many similar Trays can be found on Amazon). In order to complete the Slide-Out Tray mechanism you will also need:
1  Organizer Tray
2 M3 x 6mm Flat Head Socket Screws (or similar)
2 M3 Square Nuts
2 Double sided Tape approx 12mm x 25mm

Important Note:
The Tray Support must be located and attached to the underside of the Organizer Tray at a precise location. This can be determined by assembling and installing the Left and Right Brackets and Front Spreader then, with the Organizer Tray in the console where it will rest, make a mark on the top edge of the Tray that is directly above the centerline of the vertical portion of the guide slot in the Left or Right Bracket. Transfer the mark on the Tray to the underside of the Tray. This is the centerline of the screws that fasten the Tray Support to the Tray.

Tagi