Enclosure for RMHV2.1 - DDCSV2.1 - RMHV3.1 - DDCSV3.1 - CNC Router Controller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure for RMVH2.1/3.1 CNC controller. Includes DB25 for router, DB15 for MPG, 3.5mm for probe, C8 220V, Switch, USB
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 883
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this enclosure to mount it to my MechaPlus ProBasic 06-05 CNC Router. But it can be used for any CNC Machine. I deliberately left out the Stepper drivers which are in a separate enclosure that came with the machine. It is connected via a male-male DB25 cable (was used with the LPT port back in 2009 when I bought the machine.
You need
- IEC connector Snap In IEC C8 PLUG PANEL PLUG 250 V/2 A
- Rocker switch Snap In for hole size 12,7mm x 20mm
- DB25 Female (to CNC machine)
- DB15 Female (to MPG)
- 3.5mm Jack Socket (to tool probe)
- 3 x 28mm x 100mm aluminum tube (1mm to 2.5mm wall thickness). I added plastic replacements to print. Not sure if they last.
- LED power supply 24V/30W. I found one on Amazon that is really small (92 x 42 x 20mm).
- 14 M2.5 x 6 countersunk screws black.
The enclosure can be used as a desktop device (only use “Enclosure Main” and “Enclosure Bottom” parts) or with the arm that can be attached with 4 x M6 screws to the frame of the machine.
Printing
I deliberately used 5-6 perimeters to avoid infill in the 3mm walls. This not only makes prints faster but also stronger. I also increased the solid layers to avoid infill in the 3mm walls.
Main enclosure: The main enclosure is printed upside-down to avoid a lot of support. The print came out well in speed mode. I expected to reprint it as usual (things may not work) but besides the 8mm hole for the tool-probe connector all was good.
Mount Tube Replacements: In case you don't have a 28mm aluminum tube these parts can be printed. I have not checked the tolerances. I highly recommend using aluminum tubes.
I also included the G-code files. I highly recommend re-scicing the 3mf files once you start to incorporate latest settings. I used Prusament Galaxy Black and Galaxy Silver PLA Filament.