Biblically accurate Chess piece (Ophanim)

A biblically accurate chess piece.

Important:

• Print a base, a ring, a core eye, two right wings, and two left wings.
• Print the wings vertically as they are in the stl's. Set up your print to fill gaps and thin walls in the wings (you'll need it). I recommend setting also a raft.
• Add supports to the wings and core eye before printing. I recommend tree supports and for critical areas.
• The base does not require supports nor raft.
• DO NOT add raft NOR supports to the ring.
• Use the finest nozzle setting possible and compatible (0.08mm or less is fine). I recommend using a fine nozzle extruder (0.4mm or finer).
• Do not apply too much force when assembling the seven parts. If it feels loose, use glue.

Print Settings

• Rafts: Not needed
• Supports: Needed for wings
• Resolution: I used 0.08 mm
• Infill: I used gyroid, 15%