Nerdy Gurdy Linotte Keybox Plugs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick print to cover up the inside of the Nerdy Gurdy keybox cutouts to avoid any paint/varnish getting in there
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 322
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Standard Digital File License
Hi there,
If you are building a Nerdy Gurdy kit, at some point you need to paint/varnish all parts including the keybox. The manual says to not get any paint/varnish in the holes. This is hard to avoid with a sloppy paint brush/spray can. That's why I designed plugs to cover up the insides of all the keybox's holes without getting in the way of the surrounding paint/varnish.
The files are designed for my Linotte kit being V1.3.1 but they should also apply to the current V2.
There are 23 holes on each side (46 total) consisting of 7 different sizes:
- 14x 10.25mm (28 total)
- 2x 9.2mm (4 total)
- 2x 7.2mm (4 total)
- 2x 6.2mm (4 total)
- 1x 8.2mm (2 total)
- 1x 12.2mm (2 total)
- 1x 5.2mm (2 total)
I printed them all in AmazonBasics PLA with default settings on my MK4S.