Lego Wall Support for Bugatti Chiron 42083
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall support angled 30 degrees to display the Lego model Bugatti Chiron 42083.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 251
- Wydruki
- 0
- Wyświetlenia
- 2186
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I printed in ABS with bambu strong profile. I don't recommend printing it in PLA, since it can sag after some time. PETG might be ok!
The wheels parts will fit very snuggly, but I still recommend that you glue them together.
This support will use absolutely every millimeter available in the Bambu Lab P1/A1/X1 plate, but you can try cutting a bit of the part that touches the wall (it is plenty thick the way it is right now)
In my profile there are 3 more versions of this support for other Lego models, but I uploaded the Fusion 360 project as well for anyone that would like to adapt this support for other models.