Shoe Rack Stand - Legs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print 2 and you have the legs to build a shoe rack stand for a closet or front door. The stand fits a 12" board.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 372
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Share Alike
One day I had a spare piece of wood lying around and I needed more space for my endless pile of running shoes, so I decided to hop on printable and print out some legs to build a shoe rack. After some searching, I couldn't find a single stand that would accommodate the sheet of plywood I had laying around, so I made my own.
The top of the stand is 11.75" x 0.5". This accommodates a standard 12" piece of plywood (the perfect size to hold a shoe). Cut your piece of plywood to your desired length and throw some wood glue on it to finish the project up.
Printer Settings:
- Printer: Elegoo Neptune 4 Plus
- Slicer: Orca
- Infill: 20% (Can probably get away with less)
- Speed: 240 mm/sec
- Time: 3 hours 38 mins
- Material: 163 grams of PLA