1 / 4
xLCD Adapters for MK4S with Original Prusa Enclosure — zdjęcie 1
1 / 4

xLCD Adapters for MK4S with Original Prusa Enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Like the official xLCD adapters for the Mk4S in the Original Prusa Enclosure, with bigger holes for easier installation.

Ocena
5 / 5
Polubienia
14
Pobrania
93
Wydruki
3
Wyświetlenia
519
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

I recently upgraded my Mk4 to Mk4S. As several people mentioned in the comments, an enclosure complicates things, especially mounting the xLCD. To Prusa's credit, there are adapters to mount the injection-moulded xLCD case in the Enclosure Printable Parts. However, as I found out, the holes are too small, which makes it much less awesome than it should be. It was hard to get the screws in and my left one cracked during assembly.

These updated mounting adapters are the same concept, and same overall dimensions, but the holes have been enlarged to properly fit the screws:

 - the holes for mounting the xLCD to the adapter are larger, and the counterbores are larger, so the 3x12sT screws are now a clearance fit

 - the holes for mounting the adapter to the enclosure are larger and longer, to accommodate an M3x10 screw

As you can see in the photos, with the adapters, the LCD is low enough you can open the enclosure doors.

I printed in ABS, 0.2mm layer height, but I'm sure they'd work in any material.

Happy printing!

Tagi