1 / 1
K1C Exhaust Fan adapter for LV-H128-RF — zdjęcie 1

K1C Exhaust Fan adapter for LV-H128-RF

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The original design doesn't fit the K1C - this remix gets close enough to sand. Credit to original author.

Ocena
0 / 5
Polubienia
6
Pobrania
61
Wydruki
0
Wyświetlenia
237
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The original adapter is great, but it doesn't fit the K1C - the walls are too thick to fit in the slots.  I discovered someone else had commented that after I had printed the whole thing plus the filter adapter.  Ouch.  I felt stupid.

I remixed this with TinkerCAD (I don't know what I'm doing) to address the inner thickness issue which solved most of the problem, but I still had to take a little sandpaper to the outer side of the walls to make it fit.  This is my first TinkerCAD remix so i did my best.  Someone else can take it the rest of the way or you can sand it a hair and it'll fit.  Watch the orientation there's a definite top/bottom versus sides.  I printed it in PLA-CF, but if you'd printed in something a little less hard you could probably shove it in there without sanding.

I know it's not perfect, but it got me where I needed to be so either I hope it helps someone else or they fix it all the way where I couldn't.

As with the original, heatset some M3 inserts (I used the bog standard ones everyone gets off Amazon) and mount to the K1 Exhaust Fan Adapter with M3x8 and some washers.