EcoFlow River Foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement foot for an EcoFlow River portable battery.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 323
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
One of the little feet fell off of my EcoFlow River portable battery, so I printed a new one using TPU.
I printed this with TPU filament with maxed out perimeters, to make it completely solid.
If you remove the screws in the center of the feet, the bottom plate will come off, which makes it a lot easier to work with. Be sure to scrub the remaining adhesive out with some rubbing alcohol before you glue this one on. Mine had a very gummy layer of adhesive left. Then I just used CA glue to attach the print.
This model is designed for the first model of EcoFlow River, model EF4.