Umbrella repair splint - parametric customizable OpenSCAD (SCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The splint can be used to repair a shade umbrella with a broken stay. Set the dimensions and generate your own splint.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
Shade umbrellas often break at the hinge point where the stay is supported. This is a splint to repair such a break.
Umbrellas can get quite hot and PETG will soften, so a higher temperature material like ASA needs to be used.
At the time of publishing, the different expansion coefficients of the ASA and the underlying steel stays made the splint split during storage in the winter. If you have a very good idea to resolve that, please share it for the source code on Github.
Source code is at: https://github.com/geru/3d-scad-umbrellasplint