Modular SrHa_Gehaeuse for Air Raid Siren - hand crank version, for Small 3D-printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular version of the "SrHa-Gehaeuse", for "Air Raid Siren - hand crank version", for Small 3D-printers.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 231
- Wydruki
- 1
- Wyświetlenia
- 1790
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Share Alike
Design in process…
I tried to print the Air Raid Siren - hand crank version on my printer, but my printer is small.
After printing version 3.0/3.1, which are scaled for small printers, and noticing with disappointment that the Air Raid Siren got stuck due to poor modeling and friction problems, I decided to take matters into my own hands and create my own version.
This version is for the 1.0, original scale, of the Air Raid Siren - hand crank, but I only modeled the housing (Gehaeuse), which is the part that doesn't fit in 3D printers. To make it fit, I split the two parts into five, with additions to allow for post-printing assembly.
You'll also need to print 8 of my screws, which are attached in the files as "SrHa-Gehaeuse screw". Print that 8 times.
Using glue in the assembling is also very recommended for a stronger result.