20mm to 30mm mounting adapter plate for fpv drone
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A plate to adapt 20mm mounting holes to 30mm, originally used to mount HDZERO freestyle V1 vtx on 20mm mounting holes.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 144
- Wydruki
- 2
- Wyświetlenia
- 466
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
A plate to adapt 20mm mounting holes to 30mm, originally used to mount HDZERO freestyle V1 vtx on 20mm mounting holes of an Armattan bobcat frame, as I already had a 30mm fc and esc stack taking up the 30mm mounting holes. the 4 raised corners fit the contours of the freestyle v1 esc quite well. you might need to expand the holes on the plate for them to fit the screws nicely. the screws should be able to thread into the plastic and that holds them pretty well from my experience, but you could also put nuts on other side.