Bambulab P1S X1C AMS Spool Holder Roll Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Additional roll for AMS spool holder to allow usage of filament rolls with different thickness.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
To improve the almost perfect design from nagybirek, I redesigned the spool holder wheels (required 4x per spool holder).
I had some problems to fit filament spools of different manufacturers into the spool holder.
I made following changes to the original design:
- Diameter of spool contact surface reduced slightly to 10,5mm: This helps to fit spools with slightly bigger diameter into the AMS spool holder
- Width of spool contact surface increased to max 6,1mm & chamfer added: This helps to fit spools with bigger side profile into the spool holder (see pictures as a reference)