Slow-Feeding Pre-Breaker for Eureka Mignon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These models allow you to mount a handgrinder to the top of your Eureka to serve as a pre-breaking slow-feeder.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 328
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
Wanted to add a slow-feeding pre-breaker to my Eureka Mignon Facile (primarily so I could more easily use their Filtro Pro burr for espresso) so I built these holders to mount a handgrinder to the top. All have a lip on them to accomodate this bellows.
For the Kingrinder P0 models, they should be tight enough that you don't need anything to hold the handgrinder in place.
The Timemore C3 Max model was more of a prototype. I used those rubberbands you find on broccoli to keep it from spinning around (put them around the grinder at the top, where it can be shoved down into the print).