1 / 4
Oculus Quest Wall Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
This is an Oculus Quest wall mount that has been optimized to save on filament and printing time while still being strong enough to hold your tech!
There are 2 designs
- Hex Pattern: Saves the most filament
- Plain: Removes the hex pattern if you prefer that look
Hardware
- 4x Drywall Screws (I would recommend at least 2)
- VHB Tape (Not necessary if you use screws)
- Be warned! If you only use tape, how well this stays on your wall is completely dependent on the tape - I recommend using at least 2 screws!
Print Settings
- Walls: 4
- Infill: 20%
- Top/Bottom layers: 5
Happy printing!