7.5" HEPA Filter Enclosure for AC Infinity Cloudline PRO T4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hold 7.5" HEPA + Activated charcoal filter to exhaust 3D printer or laser etcher enclosure
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 476
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These two files encapsulate this HEPA filter for particulate filtration exhausting a 3D printer or laser etcher enclosure and fits securely on the end of an AC Infinity CLOUDLINE PRO T4 and AC Infinity 4" ducting.
- 7" HEPA Filter: https://amzn.to/4ge7ny3
- AC Infinity CLOUDLINE PRO T4 Inline Duct Fan: https://amzn.to/3CnpWC4
- AC Infinity Flexible 4-Inch Aluminum Ducting: https://amzn.to/4h63zQv
For the hose pass-thru I used, see here:
Passthru for 4" ducting by Aviator4x4 | Download free STL model | Printables.com
Print Profile:
I printed these out of PLA with 3 walls, 3 top shells, 3 bottom shell, 15% grid infil and they came out pretty much one solid piece of plastic. After 5mo I'm uploading this as a success.
No supports were necessary. Overall, fairly easy/benign print.
Those are affiliate links above. I support your freedom to use them and help me pay for filament, or not. Thanks for reading !