1 / 3
3-teiliger Zahnbürsten Halter für 3 Zahnbürsten / 3-piece toothbrush holder for 3 toothbrushes — zdjęcie 1
1 / 3

3-teiliger Zahnbürsten Halter für 3 Zahnbürsten / 3-piece toothbrush holder for 3 toothbrushes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

4,36 € – 5,33 € netto (bez VAT)

Dla pliku: zahnbuerste_wandhalter_0.2mm_PLA_MK3S_5h10m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 4,84 € netto (środek widełek).

Masa podana przez autora
54 g
Czas druku podany przez autora
5,16 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Damit die Zahnbürsten nicht mehr im Bescher stehen müssen. So that the toothbrushes no longer have to stand in the cup.

Ocena
5 / 5
Polubienia
45
Pobrania
355
Wydruki
1
Wyświetlenia
2063
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial

Gestern habe ich einen kleinen schlichten Zahnbürstenhalter erstellt und über Nacht gedruckt.

Warum 3-teilig? Damit man die Wandhalterung getrennt vom eigentlichen Zahnbürstehhalter hat. Den kann man leicht abnehmen und reinigen oder austauschen. Das war mir wichtig. 

Das Verbindungsstück gibt es eigentlich nur, damit man es leichter drucken kann. 

Bei mir habe ich die Verschraubungen mit einem M3-Gewindeeinsatz gemacht. Geht aber auch ohne. Die Bohrungen sind für M3-Schrauben ausgelegt.

Schrauben und Gewindeeinsatz gibt es hier:
https://amzn.to/3HIfGRI
https://amzn.to/3tiKtjY

____________________________

Yesterday I created a small plain toothbrush holder and printed it overnight.

Why 3 parts? So that you have the wall holder separate from the actual toothbrush holder. You can easily take it off and clean or replace it. That was important to me.

The connecting piece is actually only there so that you can print it more easily.

I made the screw connections with an M3 threaded insert. But it also works without. The holes are designed for M3 screws.



 

Tagi