Albertosaurus Bust
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Standard Digital File License
1:3 Scale detailed bust of an Albertosaurus. The model feature high-poly scale and skin texturing.
This model was made for 350mm^3 print beds due to its size. The .STL files are massive, they may take a while to load and slice!
There are two versions of the files, one with more split pieces and one with only two split pieces.
There is a pack of pegs in the “pegs .STL file", you will need to print these to assemble the entire head.
Recommended Print settings:
Infill - 15% or less gyroid pattern
Layer height .2 or less for more details
Enable supports *
*Some pieces can print supportless, print what works best for your machine.
Assembly:
The model has alignment slots for pegs on each piece. For gluing the pieces together, I recommend using epoxy or super glue.