1 / 2
Koss Porta Pro Headband: circular disks with Koss letters
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is a circular logo to be glued onto Koss PP headband from Aliexpress. Koss logo STL from @TurboFalcon_1599428
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 576
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For those who have purchased Koss headband off of Aliexpress, most of the time, the sides are missing the metallic circular plate on left and right side. I made a small disk with Koss letters STL from @TurboFalcon_1599428. The diameter of the additional disk is 17mm x 0.5mm, which fits perfectly in place of the empty spot
Printed using Elegoo PLA+ 0.1mm with 10mm/s initial layer and 20mm/s other layers on Elegoo Neptune 3 Pro