Raspberry Pi Wall Mount for 7 inch Touchscreen Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi, update: added a loosen version of the adapter part I designed this wall mount fot this Raspberry Pi 7 inch…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 144
- Wydruki
- 0
- Wyświetlenia
- 1898
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Hi,
update: added a loosen version of the adapter part
I designed this wall mount fot this Raspberry Pi 7 inch Case
https://www.thingiverse.com/thing:1585924
The Pi with the Screen have a weight about 400g. So you dont have to print the Parts solit but I recommend more then 1.6mm wallthickness and 25-30% Infill.
You can attach the Wallmount with 4 or 5 norma screws to the wall
for the Case you can use the same screws you would use for the case-cover.
In the hole for the angle adjustment fits an M8x30 screw.
Perhabs if you are interested, I will design a printable Bolt for this.
Hope you enjoy and pleas post your Makes :)
Category: 3D Printing