Barrel Drinks Dispenser 4,6,8 and 12 ways with plugs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi, first test was full of success I make an version with 4, and with 12 ways out of this…
- Ocena
- 4,667 / 5
- Polubienia
- 15
- Pobrania
- 117
- Wydruki
- 5
- Wyświetlenia
- 487
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Hi, first test was full of success
I make an version with 4, and with 12 ways out of this thing:
https://www.thingiverse.com/thing:1209927
perhaps 12 ways cant work because they are to colose for glasses standing next to each other
Now I designed my own one with 4,6 and 8 ways. My design is bigger and I designed plugs so if you only need 5 or 7 ways you can put an plug in the other holes ;)
Please post your makes! :D
Update (02.06): First print. Works good. I improved the plug (v3 now). The long plugs printed with PLA not really work so I made a short version and printed it with TPU. Works great
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Yes
Infill:
16
Filament:
ka PLA
Notes:
You schould print the plugs with TPU or some flexible Filament otherwise it may not be thight.
Category: 3D Printing