Modular Photo Studio Light Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular solution to have a simple photo studio lightbox that can be easily stored.
- Ocena
- 5 / 5
- Polubienia
- 291
- Pobrania
- 895
- Wydruki
- 2
- Wyświetlenia
- 9054
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted a simple solution for a photo studio lightbox that could be stored with minimal space.
Had the idea of using 3mm K-Line sheets and printing some parts to keep them together in a square.
Printing
All the pieces were printed in 0.3mm with 10% infill.
The front corner pieces can be printed like the below picture, has a lot of contact with the bed and each piece prints in under an hour.
↳ Front corner piece on PrusaSlicer
The back corner piece can be a bit trickier to print since it has a “slot” to insert the k-line in every axis. The solution I found was to print like the below picture, with minimal but strong support (honeycomb).
↳ Back corner piece on PrusaSlicer
Assembly
Parts needed:
- 4 FrontCorner.3mf (green)
- 4 BackCorner.3mf (red)
- 5 K-Line 3mm sheets (dimensions can be scaled, I used 500x500mm)
