1 / 1

Configurable Box with hexagon pattern

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło: Printables
Kategoria: Organizers
Licencja: Creative Commons — Attribution

Szczegóły Wydruki i komentarze Remiksy Kolekcje

This is a simple storage container which is fully configurable through OpenSCAD. It has a hexagon pattern to all sides which prevents grease and grime to build up and also looks awesome!

There are two STLs prepared:

aa_battery_box: Made for containing AA batteries
postits_box: Made to contain 80x80 Post-Its

Prints fine without support and with the default settings for PLA on the MK3/MK4. I haven't tried other materials, but there's nothing special about the box that should make any material hard to print. If you want to save a bit of material and print time, set infill to 0%.