Atherton S range cable protectors / frame plugs / cable grommets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are cable protector/guides for the Atherton S range frames.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I own a Atherton S.170 and the cable protectors / frame plugs are very fragile. As one of mine broke the cable started ratteling and rubbing on the frame inlet hole. I designed these replacement plugs to fit the hayes brakecable and the 4mm dropperpostcable. I am running an AXS shifter, so I also made a plug mith no hole. I printed the Parts in TPU which should reduce noise and protect the cables very well. For mounting them you can either take of the cables and slide them on or cut one end of the plug an wrap it around the cable. I was lacy, so I cut the small side and fused it back together with a soldering iron.