Modular Photo Studio Light Box 4.8mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of https://www.printables.com/model/116242-modular-photo-studio-light-box for 4.8mm (3/16 inch)
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 612
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Share Alike
Simple connectors to make a, light-weight and easy to disassemble photo booth.
I highly suggest using the PrusaSlicer/OrcaSlicer cut tool and adding a dovetail to print the 3 corner piece. I cut mine about half way up. Run a test print to get your dovetail tolerances right. You will still need some supports but should be easily printable.
You could rotate the 3 corner piece, so the corner is face down but you will only have 2 lines on the bed.
You will need 4 of each piece for assembly. Four 2Corner pieces for the front and Four 3Corner pieces for the back.