Raspberry Pi 5 Case bundlers for cluster.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I want to make a cluster of Raspberry Pi 5 / Pimoroni NVME Base. These are meant to tie cases together.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
I found the now deleted Raspberry Pi 4 / Pimoroni NVME base case with LOTS of ventilation that was a remix of https://www.printables.com/model/722026-raspberry-pi-5-case-for-pimoroni-nvme-ssd-base-opt a while back. Printed them out and wanted to bundle them together for a pi cluster where each node is still independent of the others. Print 4 end pieces per cluster, and 2 mid spacer pieces per space between nodes. So for example if you have a 4 node cluster, you will need 4 ends and 6 mid pieces. Cinch it all together with a long slim zip tie . This should allow plenty of airflow between the cases, and keep your pi from slding around. This was easier for me than to redesign the rack mount cases…