1 / 8
HP 32S Monitor VESA 100 adapter and mount — zdjęcie 1
1 / 8

HP 32S Monitor VESA 100 adapter and mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 3D printable VESA mount system for the HP 32S 32" computer monitor.

Ocena
0 / 5
Polubienia
4
Pobrania
73
Wydruki
0
Wyświetlenia
370
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Public Domain

This is an adapter to allow a HP 32S 32" computer monitor to mount to a VESA monitor stand.  It's two pieces - one that attaches to the monitor and one to the VESA bracket.  These two parts are bolt together to form the completed mounting system.

The designs are available on OnShape:

HP 32S VESA Mount adapter: https://cad.onshape.com/documents/8cacd23d41dceea269e2ce1f/w/2335f52b2e23ba6f736b3bcb/e/7abcf78f75c425a17e852eb7?renderMode=0&uiState=6794084edeb75707c138d974

HP 32S VESA 100: https://cad.onshape.com/documents/c71c4805a81b964d404f07c1/w/89eff6d828107bc5e2a3ef5c/e/0c9db03d61bca786a9483cb1?renderMode=0&uiState=6794088110a1461777192b4b

I printed mine in PLA with 4 perimeters, 4 top and bottom layers and 40% honeycomb infill to maximize strength.  I used two (2) M4x35mm screws with washers to attach the two parts - the M4 screws thread directly into the Mount adapter.  Four (4) M4x20mm screws with washers were used to attach the Mount adapter to the back of the monitor.  I used four (4) M5 screws with washers and nuts to attach the VESA 100 part to the monitor stand - you might need different hardware depending on your VESA mount.

Disclaimer: Please note that due to all the variations in printers, filaments and processes, the strength of the resulting printed parts may vary and may not be suitable for this purpose.  You are responsible for determining if the system is strong enough and won't drop your expensive monitor on the table.

Tagi