Nitehawk 36 Toolhead Board mount (XOL Carriage, WWG2 Extruder)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A solid NH36 THB mount that offers wire management and is compatible with the XOL and A4T from Armchair Heavy Industries
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 247
- Wydruki
- 0
- Wyświetlenia
- 2016
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This was modeled directly from the Rev C (v1.4) Nighthawk 36 CAD, and adds a couple features above and beyond what other offerings currently have. There are wire management hooks to hold wires in place. Zip ties can be used around the wires, but I found that they were not necessary. I also lengthened the USB (CAN) cable support so that you can actually get a zip tie on the wire casing on the new LDO USB cables. I added a wire protector that goes between the zip ties and the USB cable, to prevent pinpoint stress on the cable.
CAD is attached to make remixes easy.
Note: My NH36 did not come with the secondary mounting tabs… they were already snapped off, so this model does not make use of them. They would likely obstruct the cable management hooks. This mount is really solid without them. Highly recommend the Xol carriage and using the additional mount point on it.