1 / 7
Secret Scroll Gift Card
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pull-out scroll to use as an historicaly themed greeting card or gift card
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 255
- Wydruki
- 1
- Wyświetlenia
- 1258
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (69)Powiązane
With this fancy scrolls, your vouchers are presented in a classy way.
The parts are best printed in a wood filament, this gives a really nice feel to the gift. Check out the pictures for print orientation and brim recommendation. Print at 0.2mm layer hight with 0.4mm nozzle works good. I recommend print each part individually to avoid stringing.
Assembly:
- Cut your paper to a strip of 100mm width, choose the length according to how much you would like to write on it. For longer love letters 1 to 2 meters should fit;)
- glue on a rod of 2-5mm to one end of the paper strip, use a toothpicks or a skewer or a similar object
- Insert it into the axle and roll it to a roll
- Insert the paper roll into the Cylinder and feed out the other end of the paper through the slot in the cylider
- Scrow on the endcaps, not too tightly
- Glue the Pulltaps from both sides to the paper. The paper strip cannot be removed after this step! You need to cut it of and print new pulltaps!
Have fun!