1 / 2
Elevation Lab TimeCapsule Security Anchor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Worried about your AirTag TimeCapsule separating from the thing it's tracking? Look no further!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
Overview
This little security anchor attaches to the end of an Elevation Lab TimeCapsule to provide an anchor point for wire loops with in-line fasteners (also known as wire keychains).
Print Settings
- 1mm layer height
- Tested with PCCF
- Print as oriented in the model (screw heads onto build plate)
- No supports
Additional Hardware
You'll need 2x M3*16 SHSC bolts to replace the originals on the end where you decide to attach the security anchor. Note the screw head holes are quite tight, so apply some force when screwing together for the first time so make sure the threads pull the bodies tight together.