Flywoo Firefly 1.6" Baby DJI O4 Conversion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A frame top plate as well as a TPU camera mount to use an O4 Air unit in a Flywoo Firefly Baby Quad Copter
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 357
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I decided to convert my Firefly Baby to the O4 Air unit to save some weight and make it capable of capturing 4K video. The removed weight really improves its flight performance.
I printed the camera mount out of 82A TPU, but regular 95A should be fine as well. The camera fits the mount without any additional case.
The top plate should be printed in a temperature resistant filament like PETG to resist the Air Unit's heat. Once I get the chance, I will have the plate cut out of carbon fiber like the original one. Once it is done, I'll likely add the necessary files as well.
Update: Thanks to the Remix by Sergey Kolmakov, I noticed that I used the wrong export settings. V2 now has the proper hole for the standoff.