Reptile Ramp/Bridge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ramp or bridge used for small animals.
- Ocena
- 0 / 5
- Polubienia
- 50
- Pobrania
- 351
- Wydruki
- 0
- Wyświetlenia
- 1373
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Public Domain
I built this as a ramp for my bearded dragon to get in and out of his tank, but could be used for other small animals. The pieces print individually and connect together using dovetail joints. I printed this model using standard esun PLA and it is sturdy enough to support my critter. The end piece is used to hook onto the tank as seen in the photos, but if you wanted to print this without the end piece, it could still be used as a ramp or even a standalone bridge. This was printed on a bambu a1 mini, but if you wanted to support larger animals, you may want to scale the model up as this model is only 6 inches wide.