1 / 3
Ryobi Hybrid Plug
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This design uses a panel mount female 3-pin socket to make a cord for Ryobi Hybrid tools.
I had the parts and didn't want to spend money on a short extension cord, so I made this. I would suggest printing only in ABS.
Use at your own risk. Be extremely careful when making your own electrical cords.
This is intended for a 2-wire appliance cord. Make sure you solder the black wire to the small opening side and the white to the polarized or larger opening side.
If you like my design, please send a little thanks: https://ko-fi.com/gladfox
Thanks!