1 / 1
Corsair Vengeance C70 5.25 drive bay cover — zdjęcie 1

Corsair Vengeance C70 5.25 drive bay cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

5.25 drive bay cover for Corsair Vengeance C70

Ocena
0 / 5
Polubienia
4
Pobrania
89
Wydruki
0
Wyświetlenia
471
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Share Alike

I used this to make some 5.25 bay covers for more ventilation. I used my slicer to add a modifier to print no perimeters and use infill to create the vent section. I did borrow that idea from another maker/model. The clips are what are different from most I believe. I tried another bay cover and it didn't fit.

I used SuperSlicer, others will work as well.

Print Settings:

0.2 layer height - optional

added modifier to center and left a few mm around the edges: no top/bottom perimeters, honeycomb- 28%, 90deg angle

supports on build plate - needed for clip parts

PLA on a MK3S+

It's not perfect. There's a minor bow outward on one of the three I printed. Could probably use a relief cut for where the clips go into the case. Included STEP file. Have fun!