Milwaukee Packout Organizer Center Blade Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This holds your oscillating multi-tool and jig saw blades in the center of a Milwaukee Packout Organizer toolbox.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 712
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
These will fit into the center compartment of a Milwaukee Packout Organizer toolbox. They do not fit perfectly, but it gets the job done. The Milwaukee logo was made with a vinyl cutter. Print these with at filament that will not warp at a relatively low temperature. Unfortunately, I printed mine in PLA. After leaving my toolbox in the sun all day, the boxes and lids warped, as you can see in some of the photos.
The Blade Box will hold 4 oscillating multi-tool blades. I made the slots so other blades with different dimensions should fit in it. It will also hold the Dremel adapter that comes with some Milwaukee blades. The Jig Saw Blade Box will hold five t-shank, 4 inch jig saw blades. The lids and boxes are held together with magnets that are 0.315 inches in diameter and 0.118 inches in height.
The v2 versions should fix some of the minor issues that are in the original models. The oscillating multi-tool blades are hard to reach, and the Dremel adapter sticks out, which the original lid compensates for. The jig saw blade lid does not close completely, though by a very small amount. The v2 versions should fix all of these minor issues, but I have not printed them myself. The original Jig Saw Blade Box Lid will fit both the v2 and original models.