Outdoor Light Support Mount for Corrugated Metal Siding
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model forms a solid base that will allow you to mount lights on a specific pattern of corrugated metal siding. See
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 188
- Wydruki
- 0
- Wyświetlenia
- 360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model forms a solid base that will allow you to mount lights on a specific pattern of corrugated metal siding. See the pictures in order to understand how this is used to hold the light and the pattern of metal siding that it will fit.
There are two models, a FreeCad model and a Bambu Labs X1 Carbon 3mf file.
Printer Settings an Filament I used:
* Printed this with PETG HF.
* Printed it at 265 Degrees C with 75 Deg C for the printbed.
* Printed at 100 mm/s infill and 50 mm/s for outside edges,
* Printed 30% infill with a Gyroid pattern for overall strength.
* Printed 7 edge layers.
When I printed this with less infill and layers it was not as strong.
Please see pictures to see how the lights were mounted.