Creality filament guide spool mount multiple options / filament sensor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After my Kitten broke several of Matts design I decided to make a tougher version.Also added an spiral quick release…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
After my Kitten broke several of Matts design I decided to make a tougher version. Also added an spiral quick release to allow filament change out, even if you forget to feed thru it initially, like i do.
Added 3 different options for mounting a cr10 type sensor, with a tab for a badge retractor to support wires. one may need heated and bent slightly to clear the spool.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
No
Supports:
No
.24
Infill:
20-100
Notes:
Infill can be from 20 to 100% depending on your expectation of kitten attacks.
Orientation
It looks upside down compared to the original version, but this puts the well bonded bottom layer facing the ceiling, which thru the process of the cat breakage never seperated.....
Category: 3D Printer Accessories