Bond Tech infeed filament roller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is to help guide filament into a bond tech extruder with lower drag or resistance to filament travel.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is to help guide filament into a bond tech extruder with lower drag or resistance to filament travel.
2/4/2020 added a no bearing needed sheeve, and the easier to print pin from my other series of infeed rollers
3/4/2020 Added more relief to the standard location mounting relief cut for Z lead screw. also provided fusion 360 files so you can modify as you like.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 CR10 any other standard Creality extruder mounts
**Supports:**
Yes
Resolution:
.12
**Infill:**
40
Filament: ANY Filament
Notes:
Note: it has a hole for a 20mm long piece of ptfe to line the body, or make it longer to carry the filament further into the extruder.......
Category: 3D Printer Extruders