Extrusion multiplier calibration test cubes open 2 wall , .2, .3, .4, .5, .6, .8, 1.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
See my Help guide pdf for calibration instructions
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Share Alike
Cubes from .2 to 1.0mm nozzles. each size is named based on your nozzle size, the wall thickness will be 2x the nozzle. As my research and experience show this to give accurate flow calibration for overall printing. See the Help guide pdf for calculation instructions or video here.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
**Resolution:**
.12
Filament: Tianse PLA Red
Notes:
See the Help Guide for Creality and others for the flow rate calculations that tell you what to do with the measurements from cubes, slice using profile and layer heights you generally use to print.
https://support.th3dstudio.com/helpcenter/3d-printer-help-guide-creality-others/
Post-Printing
Instructions
Use calipers to measure and record 2 values from all 4 sides.
Add them together and divide by eight.
Use this average for next step.
Divide .8 by the AVG that was previously established.
Divide the target dimension by the avg value, this is the value to multipy your current estep or extrusion multiplier by to have it corrected.
Category: 3D Printing Tests