1 / 3
Lamp V11 — zdjęcie 1
1 / 3

Lamp V11

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A classic tabletop / desktop lamp with a tilted big lampshade with a geometric soothing pattern.

Ocena
0 / 5
Polubienia
11
Pobrania
55
Wydruki
0
Wyświetlenia
264
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The holder is made for a light blub socket with the following dimensions:

5.75 cm tall and 4 cm in diameter. 

And the hole for the wire is roughly 0.6-7 cm in diameter. 

Note!

!PRINT THE LAMPSHADE IN VASE MODE!

The lampshade file is already rotated so just print it in vase mode. And a word of advice; do a first layer calibration first and set the first layer speed down a bit. It is quite critical for the final result that the first layer looks nice.

And when the joint on the lampshade is being printed don't be alarmed when it look like it is going to fail, it will stabilize once it starts to be vertical and you can not see it on the end result. 

And don't add anything on the extrusion multiplier, since the two parts won't fit together if you do!

Tagi