Baldercase 2.0 ITX Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Introducing the Baldercase seriesThis is the first of the cases in the Baldercase series. Baldercases are ITX Cases…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 902
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Introducing the Baldercase series
This is the first of the cases in the Baldercase series. Baldercases are ITX Cases for different purpouses.
Specs
Dimensions: 250x190x100mm Filament to print in: Any filament that is good against heat (PETG, Carbon fiber etc.) Motherboard Support: Mini-ITX Front-IO: 2x USB-A 3.0 Drive bays: None Fan support: None CPU Cooler Height: Not tested, under 70mm recommended GPU Compatibility: None Power supply type: FlexATX
Components
3D Files
- Body
- Side Panel
- Button
- Switch Holder
Screws
- 4x Motherboard Screws (Included with Motherboard)
- 4x Motherboard Standoffs (Included with Motherboard)
- 4x PSU Screws (Included with PSU)
- 2x M3 Screws for Side Panel: Aliexpress | Amazon.de | Amazon.com | Amazon.co.uk
- 2x M3 Screws for switch holder: Aliexpress | Amazon.de | Amazon.com | Amazon.co.uk
Electronic Components
1x Mechanical Keyboard Switch: Aliexpress | Europe | U.S. | UK 1x USB-3 Cable to motherboard header: Aliexpress
Assembly
- Put the keyboard switch inside the hole on the switch holder
- Put the Switch holder inside the case, and screw it in with 2x M3 screws.
- Put the button on the switch
- Put the side panel on the case and slide it
- Screw the side panel on with 2x M3 screws
Category: Computer