Clip for Sonoff SNZB-06P Human Presence Sensor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Horizontal clip for mounting the sensor to the underside of a flat surface.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 207
- Wydruki
- 1
- Wyświetlenia
- 815
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to mount the sensor to the underside of a self, and the included magnetic mount doesn't allow it to rotate close enough to horizontal. So I designed this clip, which has allowances for the top button and the USB-C socket on the underside.
It has a 5 degree slope away from horizontal.
The inner diameter is very slightly less than the measured diameter of the sensor. On my printer it's enough to hold the sensor in place, but it's not a particularly tight fit. You may wish to reduce the diameter for a stronger grip depending on your printer's calibration.
It's designed to print upside-down from its current orientation, just because it made slightly more sense to construct it that way.
There's a single 3mm screw-hole to allow adjusting the direction of the sensor.