TELRAD reflex sight mount for telescopes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spare mount so you can move the sight from scope to scope
- Ocena
- 4 / 5
- Polubienia
- 9
- Pobrania
- 98
- Wydruki
- 2
- Wyświetlenia
- 662
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Public Domain
These spare mounts aren't expensive, but it's still cheaper to print your own. This is a 1:1 replacement for the original TELRAD mount and you should find screwholes and general dimensions in the same places.. An improvement is that there are wide slots where you can attach the mount with velcro straps or cable ties (as shown in photo). The brass thread inserts I ordered are still on a slow boat somewhere so I used M3 hex nuts in a snug recess and they are fairly secure. The M3 thumbscrews are probably on a different slow boat, so 20mm M3 screws will do for now.